NS TOOL MHX225 2 Flutes Carbide square endmill for hard material and,presision machining.
MUGEN-COATING PREMIUM
2 Flute LEAD25 End Mill
Applicable for heat resistance alloy such as stainless steels and titanium alloy by MUGEN-COATING PREMIUM.
Suitable material
| Carbonsteels | Alloy Steels, Tool Steels | Prehardened Steels | Hardened Steels | Stainless Steels | Titanium alloy | Aluminum | Copper | Plastic | |
| suitable | suitable | suitable | ~55HRC | 55HRC~ | more suitable | more suitable | suitable | suitable | suitable |
| more suitable | suitable | ||||||||
Product Detail
MHX225 Line up
| Code No. | (D)Dia. | (l)Length of Cut | (y)Neck Taper Angle | (d)Shank Dia. | (L)Overall Length |
| 08-00005-00010 | 0.1 | 0.1 | 12° | 4 | 45 |
| 08-00005-00020 | 0.2 | 0.2 | 12° | 4 | 45 |
| 08-00005-00030 | 0.3 | 0.3 | 12° | 4 | 45 |
| 08-00005-00040 | 0.4 | 0.4 | 12° | 4 | 45 |
| 08-00005-00050 | 0.5 | 0.5 | 12° | 4 | 45 |
| 08-00005-00060 | 0.6 | 0.6 | 12° | 4 | 45 |
| 08-00005-00070 | 0.7 | 0.7 | 12° | 4 | 45 |
| 08-00005-00080 | 0.8 | 0.8 | 12° | 4 | 45 |
| 08-00005-00090 | 0.9 | 0.9 | 12° | 4 | 45 |
| 08-00005-000100 | 1 | 1 | 12° | 4 | 45 |
| 08-00005-000110 | 1.1 | 1.1 | 12° | 4 | 45 |
| 08-00005-000120 | 1.2 | 1.2 | 12° | 4 | 45 |
| 08-00005-000130 | 1.3 | 1.3 | 12° | 4 | 45 |
| 08-00005-000140 | 1.4 | 1.4 | 12° | 4 | 45 |
| 08-00005-000150 | 1.5 | 1.5 | 12° | 4 | 45 |
| 08-00005-000160 | 1.6 | 1.6 | 12° | 4 | 45 |
| 08-00005-000170 | 1.7 | 1.7 | 12° | 4 | 45 |
| 08-00005-000180 | 1.8 | 1.8 | 12° | 4 | 45 |
| 08-00005-000190 | 1.9 | 1.9 | 12° | 4 | 45 |
| 08-00005-000200 | 2 | 2 | 12° | 4 | 45 |
| 08-00005-000250 | 2.5 | 2.5 | 12° | 4 | 45 |
| 08-00005-000300 | 3 | 3 | 12° | 4 | 45 |
| 08-00005-000400 | 4 | 4 | 12° | 4 | 45 |
| 08-00005-000500 | 5 | 5 | 12° | 6 | 50 |
| 08-00005-000600 | 6 | 6 | 12° | 6 | 50 |
Recommended Milling Conditions
Work Material | Stainless Steels SUS304 | Titanium Alloy Ti-6Al-4V | Heat Resistance Alloy inconel®718 | Hardened Steels SKD61(~52HRC) | ||||||||
Dia. | Spindle Speed | Feed | Spindle Speed | Feed | Spindle Speed | Feed | Spindle Speed | Feed | ||||
| min-1 | mm/min | min-1 | mm/min | min-1 | mm/min | min-1 | mm/min | |||||
Side Milling | Slotting | Side Milling | Slotting | Side Milling | Slotting | Side Milling | Slotting | |||||
| 0.1 | 50,000 | 30 | 15 | 48,000 | 30 | 15 | 25,000 | 10 | 10 | 50,000 | − | 15 |
| 0.5 | 38,200 | 130 | 50 | 37,000 | 130 | 50 | 19,000 | 40 | 20 | 19,100 | 60 | 30 |
| 1 | 19,100 | 150 | 55 | 18,000 | 150 | 55 | 9,500 | 50 | 25 | 9,500 | 75 | 40 |
| 1.5 | 12,700 | 150 | 55 | 12,000 | 150 | 55 | 6,200 | 50 | 25 | 6,400 | 75 | 40 |
| 2 | 9,500 | 170 | 60 | 9,100 | 170 | 60 | 4,800 | 55 | 30 | 4,800 | 75 | 40 |
| 2.5 | 7,600 | 180 | 65 | 7,200 | 180 | 65 | 3,800 | 60 | 30 | 3,800 | 75 | 40 |
| 3 | 6,400 | 190 | 70 | 6,000 | 190 | 70 | 3,200 | 65 | 35 | 3,200 | 80 | 40 |
| 4 | 4,800 | 190 | 70 | 4,400 | 190 | 70 | 2,400 | 65 | 35 | 2,400 | 95 | 50 |
| 5 | 3,800 | 230 | 75 | 3,400 | 230 | 75 | 1,900 | 75 | 40 | 1,900 | 95 | 50 |
| 6 | 3,200 | 260 | 85 | 2,800 | 260 | 85 | 1,600 | 80 | 40 | 1,600 | 100 | 50 |
